ПРОЕКТЫ 


  АРХИВ 


Apache-Talk @lexa.ru 

Inet-Admins @info.east.ru 

Filmscanners @halftone.co.uk 

Security-alerts @yandex-team.ru 

nginx-ru @sysoev.ru 


  СТАТЬИ 


  ПЕРСОНАЛЬНОЕ 


  ПРОГРАММЫ 



ПИШИТЕ
ПИСЬМА












     АРХИВ :: nginx-ru
Nginx-ru mailing list archive (nginx-ru@sysoev.ru)

[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

Re: off: заболел hdd на сервере free bsd


  • To: nginx-ru@xxxxxxxxx
  • Subject: Re: off: заболел hdd на сервере free bsd
  • From: Алексей Бобок <alexey.bobok@xxxxxxxxx>
  • Date: Wed, 13 May 2009 14:05:23 +0300
  • Dkim-signature: v=1; a=rsa-sha256; c=relaxed/relaxed; d=gmail.com; s=gamma; h=domainkey-signature:mime-version:received:in-reply-to:references :date:message-id:subject:from:to:content-type; bh=KHV5NXPko7EMR55ljr42nIrpHtCuoMDz34sbIE/m/X8=; b=QILXYrz5Ept4jllNr1YiVIb+nrjXQn31RbTF/91LoEfipIwNGRx6VBS3/5SmAaym7D iBytBA/1GUy0mkmbvYSxl/inh75C+TVfVVT6F6VbKlPBBtjfMUcUX0dH16M3Nzq0BwuH nqgZqVQ7p9A+7jKDfhF50ChBO+evPVT9fc9cc=
  • Domainkey-signature: a=rsa-sha1; c=nofws; d=gmail.com; s=gamma; h=mime-version:in-reply-to:references:date:message-id:subject:from:to :content-type; b=mXP6shnka1mJSLZ5XJqy8Z8U0dg/V8Mf9GXUGBEg4KuA2oLJaFSDQJFvGi7j3Qe+4n B9xVSOnl3SxOx8zojWfTdi4FSarOxPSz+J3TPt5ydqU4sK0t/2fxulprVSmDef6nnOSV QPQJAl2s6vzoCH9Tm1ijr46Ptbpo46QgSnjKw=
  • In-reply-to: <4A0AA197.6010405@xxxxxxxxxxxxxxxxxxx>
  • References: <381e60660905130137xbaf3b0eie5a6d141b14f359a@xxxxxxxxxxxxxx> <4A0AA197.6010405@xxxxxxxxxxxxxxxxxxx>

делал smartctl --test long без ошибок.
результаты smartctl -a обоих дисков в приложениях.



13 мая 2009 г. 13:31 пользователь MZ <zuborg@xxxxxxxxxxxxxxxxxxx> написал:
> Алексей Бобок wrote:
>>
>> Сначала случилось то что на fe0.jpg. перегрузился, вролде все
>> нормально. потом случилось fe0_new.jpg, перезгрузился и случилось
>> fe0_new1.jpg. прошелся fsck - все восстановилось.
>>
>> RAID контроллер какой-то дешевый STLab A-350 (Jmicron PCIE-to-SATA2),
>> жесткие диски 2 штуки WDC 250Gb.
>> На что это кому похоже?
>
> cd /usr/ports/sysutils/smartmontools/ && make -s install clean
>
> smartctl -a /dev/ad4
> smartctl -a /dev/ad6
>
>
>



-- 

--
Best regards, Alexey Bobok
fe0# smartctl -a /dev/ad6
smartctl version 5.38 [amd64-portbld-freebsd7.1] Copyright (C) 2002-8 Bruce 
Allen
Home page is http://smartmontools.sourceforge.net/

=== START OF INFORMATION SECTION ===
Model Family:     Western Digital Caviar Second Generation Serial ATA family
Device Model:     WDC WD2500AAKS-00VSA0
Serial Number:    WD-WMART0480401
Firmware Version: 01.01B01
User Capacity:    250,059,350,016 bytes
Device is:        In smartctl database [for details use: -P show]
ATA Version is:   8
ATA Standard is:  Exact ATA specification draft version not indicated
Local Time is:    Wed May 13 13:57:17 2009 EEST
SMART support is: Available - device has SMART capability.
SMART support is: Enabled

=== START OF READ SMART DATA SECTION ===
SMART overall-health self-assessment test result: PASSED

General SMART Values:
Offline data collection status:  (0x84) Offline data collection activity
                                        was suspended by an interrupting 
command from host.
                                        Auto Offline Data Collection: Enabled.
Self-test execution status:      (   0) The previous self-test routine completed
                                        without error or no self-test has ever
                                        been run.
Total time to complete Offline
data collection:                 (5160) seconds.
Offline data collection
capabilities:                    (0x7b) SMART execute Offline immediate.
                                        Auto Offline data collection on/off 
support.
                                        Suspend Offline collection upon new
                                        command.
                                        Offline surface scan supported.
                                        Self-test supported.
                                        Conveyance Self-test supported.
                                        Selective Self-test supported.
SMART capabilities:            (0x0003) Saves SMART data before entering
                                        power-saving mode.
                                        Supports SMART auto save timer.
Error logging capability:        (0x01) Error logging supported.
                                        General Purpose Logging supported.
Short self-test routine
recommended polling time:        (   2) minutes.
Extended self-test routine
recommended polling time:        (  64) minutes.
Conveyance self-test routine
recommended polling time:        (   5) minutes.
SCT capabilities:              (0x303f) SCT Status supported.
                                        SCT Feature Control supported.
                                        SCT Data Table supported.

SMART Attributes Data Structure revision number: 16
Vendor Specific SMART Attributes with Thresholds:
ID# ATTRIBUTE_NAME          FLAG     VALUE WORST THRESH TYPE      UPDATED  
WHEN_FAILED RAW_VALUE
  1 Raw_Read_Error_Rate     0x000f   200   200   051    Pre-fail  Always       
-       0
  3 Spin_Up_Time            0x0003   178   178   021    Pre-fail  Always       
-       2091
  4 Start_Stop_Count        0x0032   100   100   000    Old_age   Always       
-       0
  5 Reallocated_Sector_Ct   0x0033   200   200   140    Pre-fail  Always       
-       0
  7 Seek_Error_Rate         0x000e   200   200   000    Old_age   Always       
-       0
  9 Power_On_Hours          0x0032   098   098   000    Old_age   Always       
-       1694
 10 Spin_Retry_Count        0x0012   100   253   000    Old_age   Always       
-       0
 11 Calibration_Retry_Count 0x0012   100   253   000    Old_age   Always       
-       0
 12 Power_Cycle_Count       0x0032   100   100   000    Old_age   Always       
-       30
192 Power-Off_Retract_Count 0x0032   200   200   000    Old_age   Always       
-       29
193 Load_Cycle_Count        0x0032   200   200   000    Old_age   Always       
-       30
194 Temperature_Celsius     0x0022   108   087   000    Old_age   Always       
-       35
196 Reallocated_Event_Count 0x0032   200   200   000    Old_age   Always       
-       0
197 Current_Pending_Sector  0x0012   200   200   000    Old_age   Always       
-       0
198 Offline_Uncorrectable   0x0010   200   200   000    Old_age   Offline      
-       0
199 UDMA_CRC_Error_Count    0x003e   200   200   000    Old_age   Always       
-       0
200 Multi_Zone_Error_Rate   0x0008   200   200   000    Old_age   Offline      
-       0

SMART Error Log Version: 1
No Errors Logged

SMART Self-test log structure revision number 1
Num  Test_Description    Status                  Remaining  LifeTime(hours)  
LBA_of_first_error
# 1  Extended offline    Completed without error       00%      1691         -
# 2  Extended offline    Interrupted (host reset)      90%      1689         -
# 3  Extended offline    Completed without error       00%      1678         -
# 4  Short offline       Completed without error       00%      1677         -
# 5  Short offline       Completed without error       00%      1677         -

SMART Selective self-test log data structure revision number 1
 SPAN  MIN_LBA  MAX_LBA  CURRENT_TEST_STATUS
    1        0        0  Not_testing
    2        0        0  Not_testing
    3        0        0  Not_testing
    4        0        0  Not_testing
    5        0        0  Not_testing
Selective self-test flags (0x0):
  After scanning selected spans, do NOT read-scan remainder of disk.
If Selective self-test is pending on power-up, resume after 0 minute delay.
fe0# smartctl -a /dev/ad4
smartctl version 5.38 [amd64-portbld-freebsd7.1] Copyright (C) 2002-8 Bruce 
Allen
Home page is http://smartmontools.sourceforge.net/

=== START OF INFORMATION SECTION ===
Model Family:     Western Digital Caviar Second Generation Serial ATA family
Device Model:     WDC WD2500AAKS-00VSA0
Serial Number:    WD-WMART0463886
Firmware Version: 01.01B01
User Capacity:    250,059,350,016 bytes
Device is:        In smartctl database [for details use: -P show]
ATA Version is:   8
ATA Standard is:  Exact ATA specification draft version not indicated
Local Time is:    Wed May 13 14:02:59 2009 EEST
SMART support is: Available - device has SMART capability.
SMART support is: Enabled

=== START OF READ SMART DATA SECTION ===
SMART overall-health self-assessment test result: PASSED

General SMART Values:
Offline data collection status:  (0x84) Offline data collection activity
                                        was suspended by an interrupting 
command from host.
                                        Auto Offline Data Collection: Enabled.
Self-test execution status:      (   0) The previous self-test routine completed
                                        without error or no self-test has ever
                                        been run.
Total time to complete Offline
data collection:                 (4800) seconds.
Offline data collection
capabilities:                    (0x7b) SMART execute Offline immediate.
                                        Auto Offline data collection on/off 
support.
                                        Suspend Offline collection upon new
                                        command.
                                        Offline surface scan supported.
                                        Self-test supported.
                                        Conveyance Self-test supported.
                                        Selective Self-test supported.
SMART capabilities:            (0x0003) Saves SMART data before entering
                                        power-saving mode.
                                        Supports SMART auto save timer.
Error logging capability:        (0x01) Error logging supported.
                                        General Purpose Logging supported.
Short self-test routine
recommended polling time:        (   2) minutes.
Extended self-test routine
recommended polling time:        (  59) minutes.
Conveyance self-test routine
recommended polling time:        (   5) minutes.
SCT capabilities:              (0x303f) SCT Status supported.
                                        SCT Feature Control supported.
                                        SCT Data Table supported.

SMART Attributes Data Structure revision number: 16
Vendor Specific SMART Attributes with Thresholds:
ID# ATTRIBUTE_NAME          FLAG     VALUE WORST THRESH TYPE      UPDATED  
WHEN_FAILED RAW_VALUE
  1 Raw_Read_Error_Rate     0x000f   200   200   051    Pre-fail  Always       
-       0
  3 Spin_Up_Time            0x0003   177   177   021    Pre-fail  Always       
-       2125
  4 Start_Stop_Count        0x0032   100   100   000    Old_age   Always       
-       0
  5 Reallocated_Sector_Ct   0x0033   200   200   140    Pre-fail  Always       
-       0
  7 Seek_Error_Rate         0x000e   200   200   000    Old_age   Always       
-       0
  9 Power_On_Hours          0x0032   098   098   000    Old_age   Always       
-       1694
 10 Spin_Retry_Count        0x0012   100   253   000    Old_age   Always       
-       0
 11 Calibration_Retry_Count 0x0012   100   253   000    Old_age   Always       
-       0
 12 Power_Cycle_Count       0x0032   100   100   000    Old_age   Always       
-       18
192 Power-Off_Retract_Count 0x0032   200   200   000    Old_age   Always       
-       17
193 Load_Cycle_Count        0x0032   200   200   000    Old_age   Always       
-       18
194 Temperature_Celsius     0x0022   109   086   000    Old_age   Always       
-       34
196 Reallocated_Event_Count 0x0032   200   200   000    Old_age   Always       
-       0
197 Current_Pending_Sector  0x0012   200   200   000    Old_age   Always       
-       0
198 Offline_Uncorrectable   0x0010   200   200   000    Old_age   Offline      
-       0
199 UDMA_CRC_Error_Count    0x003e   200   200   000    Old_age   Always       
-       0
200 Multi_Zone_Error_Rate   0x0008   200   200   000    Old_age   Offline      
-       0

SMART Error Log Version: 1
No Errors Logged

SMART Self-test log structure revision number 1
No self-tests have been logged.  [To run self-tests, use: smartctl -t]


SMART Selective self-test log data structure revision number 1
 SPAN  MIN_LBA  MAX_LBA  CURRENT_TEST_STATUS
    1        0        0  Not_testing
    2        0        0  Not_testing
    3        0        0  Not_testing
    4        0        0  Not_testing
    5        0        0  Not_testing
Selective self-test flags (0x0):
  After scanning selected spans, do NOT read-scan remainder of disk.
If Selective self-test is pending on power-up, resume after 0 minute delay.


 




Copyright © Lexa Software, 1996-2009.