ПРОЕКТЫ 


  АРХИВ 


Apache-Talk @lexa.ru 

Inet-Admins @info.east.ru 

Filmscanners @halftone.co.uk 

Security-alerts @yandex-team.ru 

nginx-ru @sysoev.ru 

  СТАТЬИ 


  ПЕРСОНАЛЬНОЕ 


  ПРОГРАММЫ 



ПИШИТЕ
ПИСЬМА












     АРХИВ :: Inet-Admins
Inet-Admins mailing list archive (inet-admins@info.east.ru)

[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

[inet-admins] Протащитесь :)


  • To: <inet-admins@info.east.ru>
  • Subject: [inet-admins] Протащитесь :)
  • From: "Dmitri Kalintsev" <dek@hades.uz>
  • Date: Wed, 26 Sep 2001 08:52:41 +1000
  • Delivered-to: inet-adm-outgoing@frog.east.ru
  • Delivered-to: inet-admins@info.east.ru

Мндааа.... И я этот какашечный бут-код успел позалить в несколько ящиков.
Теперь блин откатывать... :(

SY,
--
 CCNP, CCDP (R&S)                          Dmitri E. Kalintsev
 CDPlayer@irc               Network Architect @ connect.com.au
 dek @ connect.com.au    phone: +61 3 9674 3913 fax: 9251 3666
 http://-UNAVAIL-         UIN:7150410  mobile: +61 414 821 382

----- Original Message -----
From: "Ross Cartlidge"
To: "Mark Prior"
Sent: 25 сентября 2001 г. 17:59
Subject: Re: Problem with ade-cor3 upgrade this morning


> Hi Mark
>
> I have got to the bottom of this! Been reading the code :-)
>
> The is a new "feature" added to 12.0(18)S, 12.2(3)
> which sets a monitor variable to the last failed image -
> "failed" is defined as loading but not getting as far as:-
>
>
> Press RETURN to get started!
>
> So if you had:-
>
> boot system flash slot0:c7200-k3p-mz.120-19.S
> boot system flash slot0:c7200-k3p-mz.120-18.S
>
>
> Then the bootflash image would set a "Boot skip index" (bsi) to 1
> when it loads 19S. If 19S then crashes before it can set bsi to 0 -
> just after it writes "Press RETURN..." Then on reload it would
> skip 19S and load 18S. If all the boot system commands are tried
> then it will boot the first image in flash.
>
> This was to fix:-
>
> CSCdi18017 need mechanism to specify backup image
>
> to stop "cylic reloading" when trying a new image.
>
>
> So when this booted the bsi must have been 2. This could happen if
>
> a) You power-cycled the box twice before an image initialized
>
> b) You upgraded the bootflash and not the system image - this would
>      make the bootflash set bsi - but the system image wouldn't clear
>      bsi. Boot this twice and the index would get to 2.
>
> 1. So if you have a bootflash with this feature, you need a system image
> with this feature or your boot system commands will quickly become
> useless.
>
> 2. Dont power off before the system is initialised
>
> I agree this is confusing - I would not use boot images after 12.0(17)S
> if I were you.
>
> So what do you think - do you like the feature - or dislike it.
>
> rossc
>
>
>
> Mark Prior wrote:
>
> > When I was adding memory to the 7206's in Adelaide this morning I also
> > upgraded the boot and system images (to 12.0(18)S1 and 12.0(18.6)S1
> > respectively). This went fine on both ade-cor1 and ade-cor2 but ade-cor3
> > didn't like it much. The system complained about the maximum interface
> > point count, said CEF wasn't running and then ignored the two "boot
> > system" statements. As a result it booted up the first image on the
> > flash card (12.0(16)S) rather than the one I wanted. I assume this is
> > all the result of the 2 2FE-ISL PAs on ade-cor3 but IOS wasn't as picky
> > before and the CEF error is just plain weird. We aren't using the second
> > FE PA so I guess we could remove it but it would be nice if IOS wasn't
> > as stroppy.
> >
> > Mark.
> > -- ade-cor3#
> > System Bootstrap, Version 11.1(13)CA, EARLY DEPLOYMENT RELEASE SOFTWARE
> > (fc1)
> > Copyright (c) 1997 by cisco Systems, Inc.
> > C7200 processor with 131072 Kbytes of main memory
> >
> >
CCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCC
CC
> >
> > CCCCCCCCCCCCCCC
> > Self decompressing the image :
> > #################################################
> >
##############################################################################
##
> >
> >
##############################################################################
##
> >
> >
##############################################################################
##
> >
> > ##### [OK]
> >
> > %C7200-3-PACONFIG: Exceeds 800 aggregate port adaptor bandwidth points
> > Uncompressed configuration from 29563 bytes to 170884 bytes
> > % CEF not enabled. Enable first
> > % CEF not enabled. Enable first
> > % CEF not enabled. Enable first
> > % CEF not enabled. Enable first
> > % CEF not enabled. Enable first
> > %Clockrate rounded to nearest value that your hardware can support.
> > %Use Exec Command 'show running-config' to see the value rounded to.
> > % CEF not enabled. Enable first
> > % CEF not enabled. Enable first
> > % CEF not enabled. Enable first
> > % CEF not enabled. Enable first
> > % CEF not enabled. Enable first
> > % CEF not enabled. Enable first
> > % CEF not enabled. Enable first
> > % CEF not enabled. Enable first
> > % CEF not enabled. Enable first
> > % CEF not enabled. Enable first
> > % CEF not enabled. Enable first
> > % CEF not enabled. Enable first
> > % CEF not enabled. Enable first
> > % CEF not enabled. Enable first
> > %SYS-6-READ_BOOTFILE_SKIP: boot system slot0:c7200-k3p-mz.120-18.6.S1
> > command is
> >  skipped
> >
> > %SYS-6-READ_BOOTFILE_SKIP: boot system slot0:c7200-k3p-mz.120-17.S
> > command is sk
> > ipped
> >
> > %SYS-6-BOOT_MESSAGES: Messages above this line are from the boot loader.
> > Self decompressing the image :
> > #################################################
> >
##############################################################################
##
> >
> >
##############################################################################
##
> >
> >
##############################################################################
##
> >
> >
##############################################################################
##
> >
> >
##############################################################################
##
> >
> >
##############################################################################
##
> >
> > ################################ [OK]
> >
> >               Restricted Rights Legend
> >
> > Use, duplication, or disclosure by the Government is
> > subject to restrictions as set forth in subparagraph
> > (c) of the Commercial Computer Software - Restricted
> > Rights clause at FAR sec. 52.227-19 and subparagraph
> > (c) (1) (ii) of the Rights in Technical Data and Computer
> > Software clause at DFARS sec. 252.227-7013.
> >
> >            cisco Systems, Inc.
> >            170 West Tasman Drive
> >            San Jose, California 95134-1706
> >
> >
> > Cisco Internetwork Operating System Software
> > IOS (tm) 7200 Software (C7200-K3P-M), Version 12.0(16)S, EARLY
> > DEPLOYMENT RELEAS
> > E SOFTWARE (fc1)
> > TAC Support: http://www.cisco.com/cgi-bin/ibld/view.pl?i=support
> > Copyright (c) 1986-2001 by cisco Systems, Inc.
> > Compiled Fri 23-Mar-01 22:35 by ninahung
> > Image text-base: 0x60008948, data-base: 0x60F44000
> >
> >
> > Compliance with U.S. Export Laws and Regulations - Encryption
> >
> > This product performs encryption and is regulated for export
> > by the U.S. Government.
> >
> > This product is not authorized for use by persons located
> > outside the United States and Canada that do not have prior
> > approval from Cisco Systems, Inc. or the U.S. Government.
> >
> > This product may not be exported outside the U.S. and Canada
> > either by physical or electronic means without PRIOR approval
> > of Cisco Systems, Inc. or the U.S. Government.
> >
> > Persons outside the U.S. and Canada may not re-export, resell,
> > or transfer this product by either physical or electronic means
> > without  prior approval of Cisco Systems, Inc. or the U.S.
> > Government.
> >
> > cisco 7206 (NPE200) processor with 114688K/16384K bytes of memory.
> > R5000 CPU at 200Mhz, Implementation 35, Rev 2.1, 512KB L2 Cache
> > 6 slot midplane, Version 1.3
> >
> > Last reset from power-on
> > X.25 software, Version 3.0.0.
> > 4 Ethernet/IEEE 802.3 interface(s)
> > 5 FastEthernet/IEEE 802.3 interface(s)
> > 12 Serial network interface(s)
> > 125K bytes of non-volatile configuration memory.
> > 4096K bytes of packet SRAM memory.
> >
> > 20480K bytes of Flash PCMCIA card at slot 0 (Sector size 128K).
> > 4096K bytes of Flash internal SIMM (Sector size 256K).
> > Uncompressed configuration from 29563 bytes to 170884 bytes
> > %Clockrate rounded to nearest value that your hardware can support.
> > %Use Exec Command 'show running-config' to see the value rounded to.
> >
> >
> > Press RETURN to get started!
> >
> >
> > 00:00:09: %C7200-3-PACONFIG: Exceeds 800 aggregate port adaptor
> > bandwidth points
> > 00:00:14: %LINK-3-UPDOWN: Interface FastEthernet0/0, changed state to up
> > 00:00:14: %LINK-3-UPDOWN: Interface FastEthernet1/0, changed state to up
> > 00:00:14: %LINK-3-UPDOWN: Interface FastEthernet1/1, changed state to up
> > 00:00:14: %LINK-3-UPDOWN: Interface FastEthernet2/0, changed state to up
> > 00:00:14: %LINK-3-UPDOWN: Interface FastEthernet2/1, changed state to up
> > 00:00:14: %LINK-3-UPDOWN: Interface Serial3/0, changed state to down
> > 00:00:14: %LINK-3-UPDOWN: Interface Serial3/1, changed state to up
> > 00:00:14: %LINK-3-UPDOWN: Interface Serial3/2, changed state to down
> > 00:00:14: %LINK-3-UPDOWN: Interface Serial3/3, changed state to up
> > 00:00:14: %LINK-3-UPDOWN: Interface Serial4/0, changed state to down
> > 00:00:14: %LINK-3-UPDOWN: Interface Serial4/1, changed state to down
> > 00:00:14: %LINK-3-UPDOWN: Interface Serial4/2, changed state to down
> > 00:00:14: %LINK-3-UPDOWN: Interface Serial4/3, changed state to down
> > 00:00:14: %LINK-3-UPDOWN: Interface Serial5/0, changed state to down
> > 00:00:14: %LINK-3-UPDOWN: Interface Serial5/1, changed state to up
> > 00:00:14: %LINK-3-UPDOWN: Interface Serial5/2, changed state to down
> > 00:00:14: %LINK-3-UPDOWN: Interface Serial5/3, changed state to down
> > 00:00:14: %LINK-3-UPDOWN: Interface Ethernet6/0, changed state to up
> > 00:00:14: %LINK-3-UPDOWN: Interface Ethernet6/1, changed state to up
> > 00:00:14: %LINK-3-UPDOWN: Interface Ethernet6/2, changed state to up
> > 00:00:14: %LINK-3-UPDOWN: Interface Ethernet6/3, changed state to up
> > Access to this system is restricted solely to employees
> > of connect.com.au Pty Ltd and authorised service personnel.
> >
> > ade-cor3 line 0
> >
> >
> > User Access Verification
> >
> > Username: mrp
> > Password:
> >
> > ade-cor3>sh hard
> > Cisco Internetwork Operating System Software
> > IOS (tm) 7200 Software (C7200-K3P-M), Version 12.0(16)S, EARLY
> > DEPLOYMENT RELEAS
> > E SOFTWARE (fc1)
> > TAC Support: http://www.cisco.com/cgi-bin/ibld/view.pl?i=support
> > Copyright (c) 1986-2001 by cisco Systems, Inc.
> > Compiled Fri 23-Mar-01 22:35 by ninahung
> > Image text-base: 0x60008948, data-base: 0x60F44000
> >
> > ROM: System Bootstrap, Version 11.1(13)CA, EARLY DEPLOYMENT RELEASE
> > SOFTWARE (fc
> > 1)
> > BOOTFLASH: 7200 Software (C7200-BOOT-M), Version 12.0(18)S1, EARLY
> > DEPLOYMENT RE
> > LEASE SOFTWARE (fc1)
> >
> > ade-cor3 uptime is 1 minute
> > System returned to ROM by power-on at 20:19:12 UTC Sun Sep 23 2001
> > System image file is "slot0:c7200-k3p-mz.120-16.S"
> >
> > cisco 7206 (NPE200) processor with 114688K/16384K bytes of memory.
> > R5000 CPU at 200Mhz, Implementation 35, Rev 2.1, 512KB L2 Cache
> > 6 slot midplane, Version 1.3
> >
> > Last reset from power-on
> > X.25 software, Version 3.0.0.
> > 4 Ethernet/IEEE 802.3 interface(s)
> > 5 FastEthernet/IEEE 802.3 interface(s)
> > 12 Serial network interface(s)
> > 125K bytes of non-volatile configuration memory.
> > 4096K bytes of packet SRAM memory.
> >
> > 20480K bytes of Flash PCMCIA card at slot 0 (Sector size 128K).
> > 4096K bytes of Flash internal SIMM (Sector size 256K).
> > Configuration register is 0x2102
> --
> Ross Cartlidge, Cisco Systems
> ANS/SP Engineer Asia Pacific, 821 Pacific Highway, Chatswood, NSW, Australia



=============================================================================
"inet-admins" Internet access mailing list. Maintained by East Connection ISP.
Mail "unsubscribe inet-admins" to Majordomo@info.east.ru if you want to quit.
Archive is accessible on http://info.east.ru/rus/inetadm.html



 




Copyright © Lexa Software, 1996-2009.