Re: filmscanners: Silverfast Summary Tables

[RogerMillerPhoto@aol.com]

It would be worth your while to go through Ian Lyons' tutorials and compare 
each item in my tables to his recommendations for the Mac.  Correct anything in 
my tables that is incorrect for the Mac and you end up with your own set of 
tables.  Then you'd have your own version.  I don't think there's all that much 
difference between the PC and the Mac except for gamma settings.

In a message dated Thu, 6 Dec 2001  9:07:10 AM Eastern Standard Time, "JackG" 
<jackg@poboxes.com> writes:

> Hi Roger,
> 
> Thanks for sending the tables, unfortunately I will be using a Mac for
> scanning and I assume they will only work on a PC.
> 
> Thanks,
> 
> John in OKC
> 
> ----- Original Message -----
> From: <RogerMillerPhoto@aol.com>
> To: <filmscanners@halftone.co.uk>
> Sent: Thursday, December 06, 2001 12:52 AM
> Subject: filmscanners: Silverfast Summary Tables
> 
> 
> | I received two requests (one off-list), and I suspect a few others might
> be
> | interested as well, so I'm attaching a Microsoft Word document with my
> | tables.  The tables give a summary of the settings you need to use when
> | working with SilverFast.  I can't guarantee their accuracy, but I did the
> | best I could.  Most of what's in the tables is based on Ian Lyons'
> tutorials,
> | but even with his help, I don't find SilverFast easy to understand.  (Ian,
> if
> | you could take a quick look at the tables and correct any mistakes I may
> have
> | made, I'd appreciate it.)
> |
> | My tables are no substitute for Ian's tutorials.  You need to read his
> | tutorials before you use my tables.  I left a few things out of the tables
> | that were obvious to me, but if they aren't to you, you should add them to
> | the tables yourself.  The tables were intended for version 5.5 of
> SilverFast
> | Ai and HDR for a Windows PC system with IT8 calibrated scanners.  I find
> the
> | tables very helpful as a check list to make sure that I haven't missed
> | anything.  I hope they are of some value to others as well.
> |
> | In a message dated 12/5/2001 6:15:33 AM Pacific Standard Time,
> | jackg@poboxes.com writes:
> |
> |
> | > Hi Roger,
> | >
> | > Would you post your tables?
> | >
> | > John in OKC
> | >
> |
> |
> |